FS-V31M Keyence Fiber Optic Sensor

Specifications

Model: NPN,FS-V31M
Type: Monitor output
Control output: 1 output
Monitor output (1 to 5 V):1 input
Light source: Red, 4 element LED (Wavelength:640 nm )
Response time:33µs（HIGH SPEED）/250µs(FINE)/1 ms(SUPER TURBO)/4ms(ULTRA TURBO)/16 ms (MEGA TUROB)   
Output selection: LIGHT-ON/DARK-ON(switch-selectable)
Display indicator: Operation indicator：Red LED/Dual digital monitor: Dual 7-segment display,
Preset Value (4 digit green LED indicator ) and Current Value range:0 to 64512; Excess gain :OP to 999P
Hold function: Possible to display both peak and bottom hold values, selectable from 5 variations
Bar LED monitor: Excess gain displayed (85﹪to 115﹪ in 7 steps).Scaling display.
Control output: open-collector 40V, 100 mA  max.(main unit only )/20mA max.(when the expansion unit is connected).
                Residual voltage: 1 V max.
Monitor output: Voltage output:1 to 5V ,Load resistance:10 kΩ min ,Repeatability: ±0.05﹪ of F.S
               Response time: 1 ms (FS-V31M only)
External input: Non-voltage input(contact, solid-state),Input time：2 ms (ON) /20 ms (OFF) min.
Unit expansion: Up to 16 expansion units can be connected (a total of 17 units).
                Note that the 2-output type should be counted as two units.
Power supply: 12 to 24 VCD ± 10﹪,ripple: 10﹪max. Class2
Current consumption: Normal operation: 990 mW (at 24V: 42 mA max, at 12 V：83 mA max.)/
Power-saving mode: 820 mW (at 24 V: 34 mA max, at 12 V: 68 mA max.)
Ambient illumination: Incandescent lamp: 20,000 lux max. Sunlight: 30,000 lux max.
Ambient temperature: 14 to 131 oF(-10 to 55 0C ),No condensation
Relative humidity: 35 to 85﹪,No condensation
Vibration: 10 to 55Hz, double amplitude: 1.5 mm , 2hours each in the X,Y and Z axis
Shook: 500 m/s2 in X, Y, and Z directions, 3 times respectively
Housing: Polycarbonate
Size: 30.3mm(H)×9.8 mm (W) ×71.8 mm (H)
Weight: 80g